Use and Care Manual

TECHNICAL DATA
AUTOMOTIVE RUST REFORMER
Rust-Oleum Corporation Form: GDH-1223
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 032818
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
RUST REFORMER BRUSH
Resin Type
Vinyl Acrylic Copolymer
Pigment
Barium Sulfate
Solvents
Water, Diethylene Glycol Methyl Ether
Weight
Per Gallon
10.5 lbs.
Per Liter
1.26 kg
Solids
By Weight
54.5%
By Volume
42.9%
Volatile Organic Compounds
<30 g/l (0.24 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT
4.0-6.0 mils
(100-150µ)
Practical Coverage
at Recommended DFT
12-20 sq.ft./8 ounce container
(1.1-1.8 m
2
/container)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
15-20 minutes
Handle
1 hour
Recoat
Oil-based paint: 3 hours
Lacquer or Aerosol: 3 days
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.