Use and Care Manual

TECHNICAL DATA
AMERICAN ACCENTS DECORATIVE KITS
Rust-Oleum Corporation Form: GDH-394
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 072914
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
BASE COAT SPRAY
ACRYLIC TOP COAT
Resin Type
Modified Alkyd
Water-based Acrylic
Pigment Type
Varies with color
Calcium Carbonate
Solvents
Acetone, Naphtha, Xylene
Water, Glycol Ethers
MIR
1.4 Max
NA
Fill Weight
12 ounces
NA
Weight
Per Gallon
NA
10.5-10.8 lbs.
Per Liter
NA
1.26-1.29 kg
Solids
By Weight
NA
47.6-52.2%
By Volume
NA
34.2-37.8%
Volatile Organic Compounds
NA
<220 g/l (1.83 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT (unthinned
material)
NA
3.0-6.0 mils
(75-150µ)
Theoretical Coverage at 1 mil DFT
(25µ)
NA
34-38 sq.ft. per 8 oz. can
(0.84-0.93 m
2
/l)
Practical Coverage at
Recommended DFT
(assumes 15% material loss)
10-12 sq.ft./can
(0.9-1.09 m
2
/can)
14-32 sq.ft. per 8 oz. can
(0.23-0.78 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
20 minutes
Handle
1 hour
1 hour
Recoat
Within 1 hour or after 24 hours
After 1 hour
Dry Heat Resistance
200°F (93°C)
NA
Shelf Life
5 years
5 years
Flash Point
-156ºF (-104ºC)
>200ºF (93ºC)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.