Use and Care Manual

TECHNICAL DATA
AMERICAN ACCENTS METALLIC LEAFING PENS
.PHYSICAL PROPERTIES .
Rust-Oleum Corporation Form: GDH-164
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 090613
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PAINT PEN
Resin Type
Polystyrene
Pigment Type
Varies with color
Solvents
Mineral Spirits
Specific Gravity
1.12
Volatile Organic Compounds
<100 g/l
Recommended Dry Film
Thickness (DFT) per Coat
NA
Practical Coverage at
Recommended DFT (assumes
15% material loss)
Varies with surface type and porosity
Dry Times at
77°F (25°C) and
50% Relative
Humidity
Touch
15-30 minutes
Handle
1 hour
Fully Dry
2-4 hours
Shelf Life
3 years
Flash Point
91ºF (32ºC)
Safety Information
For more information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.