User Manual

6 XZone70V Installation Manual
ETHERNET CONNECTION AND FACTORY RESET
Ethernet Connection
The Ethernet connection is used for conguration and audio streaming as well as
for enabling control via the MyRussound App or the XTS Touchscreen. The default
network setting is DHCP-enabled, but the XZone70V can be congured with static
IP addressing using Web Cong. The Ethernet connection is also used for the built-
in streaming services and for playing any music stored on connected network
drives using DLNA.
Note: While the XZone70V has a single physical Ethernet connection, it will
occupy a total of 2 IP addresses on the network. One address is for XZone70V
management, and the other is for the internal streaming module that the
XZone70V utilizes to provide audio content. If using DHCP, both addresses will use
DHCP. If using static IP addressing, both addresses will need to be congured with
a static address.
Factory Reset
The factory reset button has two functions. A 3-second press and hold will restore
network settings to DHCP. A 10-second press and hold will reset the XZone70V to
its factory default settings. When performing either of these functions, do not
power o the XZone70V. It will reboot automatically on its own at the proper
time. The entire reset process will take several minutes. The XZone70V status LED
will illuminate green when the process is complete.
The factory reset deletes all conguration and personal information including
service account settings and passwords.
Note: After a factory reset, the XZone70V will require valid Russound Certied
Installer credentials in order to be unlocked and congured again.
INSTALLATION OVERVIEW
Installation
Step 1. Mounting the XZone70V
The XZone70V comes with a pair of rack mount ears,
that allows XZone70V to be mounted in any of four ways:
Installation
Clearance Requirements
When installing the XZone70V, the clearances shown here MUST be kept for
proper ventilation of the unit.
2. Rack Mount
Attach the included rack mount ears to both sides of the unit as shown.
3. Under Cabinet Mount
Attach the included rack
mount ears to both sides of
the unit, with mounting ears
facing up as shown.
4. Wall Mount
Attach the included rack
mount ears to both sides of the
unit, with mounting ears facing
up as shown.
Top of the unit
Rack mount ear
1. Table Top Mount
1.75” (4.4cm)
XZone70V Streaming Audio Amplifier
Level
System VolumeMic Volume
Clip