UNO-TS2 Touchscreen Instruction Manual
IMPORTANT SAFEGUARDS Safety Instructions “WARNING” “ TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.” “CAUTION” “ TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TABLE OF CONTENTS User Guide Introduction ........................................................................................................4 Front Panel and Home Screen ............................................................................5-6 Source Screens Common Features ......................................................................7 Source Screen Examples ......................................................................................8 Controlling the Russound Tuner ...........
INTRODUCTION Stylish to look at, a joy to use. The UNO-TS2 Touchscreen is a full-featured color touchscreen that provides a powerful user interface for Russound multi-source, multi-zone A/V systems. The user can easily access, control and enjoy music and video from anywhere in the home. Housed in an attractive bezel, the UNO-TS2 features beautifully rendered screens and elegantly simple displays.
USER GUIDE Front Panel and Home Screen 1 2 10 3 9 4 8 5 7 6 1 IR RECEIVER - Receives IR signals from source and SRC2 remote controls, and passes them to the controller and source equipment 2 TOUCHSCREEN - Full color resistive touchscreen with multi-sound feedback. Screen can be programmed to go blank after a period of inactivity. touching the screen anywhere reactivates it.
USER GUIDE Home Screen Home Screen Fields 1. Display Window At the top of the screen, the display window shows the active source name and peripheral info. A red bar reflects the volume level in the room the touchscreen is controlling. The small boxes with “master,” “party,” “shared” and “DND” reflect system status of shared source, party mode and master keypad, and do not disturb settings. These are accessed through the Options button. the screen and a “harp” sound is heard.
USER GUIDE Source Screens Common Features and source is in the Do Not Disturb mode. When in this mode, other rooms are prevented from changing the state of the source (change channels, etc.). The DND icon also appears on keypads for all other rooms that select this source. Although there are different screens for different sources, they do share some common features. 1.
USER GUIDE Source Screen Examples The UNO-TS2 offers up a new screen for each source that is configured in the RNET system. A source can be a CD Player or Changer, DVD Player or Changer, iBridge Dock, VCR, Cable, Tuner, Satellite, Satellite Radio, Russound SMS3 Media Server or Russound Tuner.
USER GUIDE Controlling the Russound Tuner The UNO-TS2 offers an expanded view of source information and selections when used with the Russound Tuner. The tuner screens show bank and preset names in a single view, with the ability to save a preset right from the touchscreen. For satellite radio, a main screen shows the channel name plus the artist and song in the same screen.
USER GUIDE Controlling the Russound Tuner Numeric Station/Channel Selection Tuner stations or channels can be directly selected from the numeric entry screen. For satellite radio channels, enter the channel number (from 1 to 3 digits). For AM/FM, enter the 3- or 4-digit frequency number. Press the AM or FM button to conveniently switch between AM and FM from the touchscreen.
USER GUIDE Controlling the Russound SMS3 Media Server The UNO-TS2 offers an expanded view of source information and selections when used with the Russound SMS3 Media Server in an RNET system. A single view shows the active theme, artist Media Server Main Screen The main screen for the media server shows the current Stream, current Theme, and What’s Playing now. When navigating within the media server screen set, you can return to this screen by pressing “main” on the navigation bar.
USER GUIDE Controlling the Russound SMS3 Media Server Media Server Music Request Screen The Request Music screen for the media server lets you request music a variety of ways: by Artist, by Album, by Genre and more. Press the desired item to proceed to that category’s selections.
USER GUIDE Controlling an iPod using the Russound iBridge Dock The UNO-TS2 offers an expanded view of iPod song information and selection when used with the Russound iBridge Dock to control an iPod. A single view shows the active playlist, artist name, song title and album name. Linked screens show more detailed song information and lead to search fields to choose music by genre, artist, album and more.
USER GUIDE Controlling an iPod using the Russound iBridge Dock iPod (iBridge Dock) Selection Screen Each “request” selection screen shows the first four or five items in the list selected. The scroll up/down arrows on the left of the screen allow search through the list. The hard button secondary function also lets you scroll through the displayed list.
USER GUIDE Setting Room Preferences Options Screen Options The Options button on the home screen brings up a variety of room and screen setting options and touchscreen adjustments. CAV front A/V - This button selects as a source the component connected to the CAV6.6 front A/V connection. Features, Sound Control and Screen Setup These buttons bring up additional screens and are discussed below.
USER GUIDE Setting Room Preferences Sound Control Screen Treble:+2 The Sound Control button on the Options screen brings up a variety of room setting options. Bass - Adjust the bass level for the room Balance - Adjust the left-to-right speaker balance for the room Treble - Adjust the treble for the room Loudness - Turn loudness (more bass, fuller sound at “low” volumes) on or off for the room. A checkmark appears to indicate “Loudness” activation.
INSTALLER GUIDE UNO-TS2 Overview UNO-TS2 Overview for Installers Note: The following minimum firmware revisions are required for use with the UNO-TS2: CAV6.6 Rev. 3 CAV6.6 Rev. 4 CAM6.6 CAM Internal AM/FM Tuner CAM Internal XM Module ST2 Dual Tuner ST2-XM (ST2 Chassis) ST2-XM (XM Module) ST2S Tuner (Sirius) SMS3 Media Server 2.01.16 3.01.10 1.01.05 1.01.01 2.00.05 3.00.10 3.00.10 2.00.05 1.00.10 2.00.07 The UNO-TS2 is an RNET-system enabled touchscreen that functions similarly to the UNO-S2 keypad.
INSTALLER GUIDE UNO-TS2 Touchscreen Connections CAT-5 Connection The UNO-TS2 Touchscreen uses a 110-punchdown terminal to provide a simple installation and strong connection for CAT-5 cable’s eight conductors. Punchdown terminals require the use of a punchdown tool. Attach the CAT-5 cable to the 110-punchdown terminal on the UNO-TS2 touchscreen as shown, matching the conductor colors to the connection color guide.
INSTALLER GUIDE UNO-TS2 IR Receiver Connection The UNO-TS2 has an External IR Receiver In terminal for connecting an external IR Receiver such as the Russound 858, SaphIR 862 Eye, or SaphIR 860 Phantom. receiver model’s manual for the specific wire needs. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIGNAL) and the other pair connecting ST (STATUS) and V+ (+12VDC). Connect the shield or drain to ground at the UNO-TS2 only.
INSTALLER GUIDE UNO-TS2 Touchscreen Controller Connections For One UNO-TS2 per Controller An RNET controller (CAV6.6, CAM6.6) supports one UNO-TS2 and up to five UNO keypads per UNO-TS2 UNO-S1 controller, directly connected to the UNO System Keypad Ports located on the rear panel. UNO-S2 UNO-S2 UNO-S2 UNO-S2 102.5 CAT-5 Cable CAV6.6 CAT-5 Cable For 2 to 6 UNO-TS2s per Controller (One UNO-TS2 per Zone) After the first UNO-TS2, any additional UNO-TS2s must be connected to an SA-ZX3 Keypad Splitter.
INSTALLER GUIDE UNO-TS2 Touchscreen Installation Keypad Installation Size of UNO-TS2 bezel 6.0” W x 4.875” H To install a double-gang keypad, you will need a UL/CSA approved plastic 32ci double-gang electrical box. Note the minimal clearance around the box for the bezel. This is larger than a typical light switch cover, so additional space may be required. Size of standard 2-gang box 4.0” W x 3.
INSTALLER GUIDE Configuring Sources After sources have been configured and named in the CAV6.6 or CAM6.6 system, they must also be set up in the UNO-TS2. This procedure assigns the correct screens for each source type. For proper operation, Russound components must be given the correct Source Type in the Source Setup process. Russound Component UNO-TS2 Source Type ST2 Tuner, CAM6.6T ST2-XM(2), ST2S, CAM6.
INSTALLER GUIDE Other Installer Setup Functions Several installer-level functions are accessible from the Installers Setup screen. controlling and the ID number of the controller to which it is connected. About - This screen shows the current firmware and screen versions on this touchscreen. Note: The controller must be power cycled after the Zone Number and/or Controller ID is changed on the UNO-TS2.
INSTALLER GUIDE Other Installer Setup Functions Diagnostics - This series of screens provides access to the diagnostics to provide some simple testing of the touchscreen’s performance. Diagnostics This screen is shown when “Diagnostics” is selected Touch Test - This screen is a tool for checking the touch sensitivity and calibration of the keypad. As each letter or number is pressed, the touchscreen “says” the letter/number.
INSTALLER GUIDE Other Installer Setup Functions Firmware Update There may be future updates to the UNO-TS2 firmware. Updates will be available online through the Document Center at www.russound.com, under RNET Systems. Before starting the update procedure, download updates to a PC and connect the Programming Cable (P/N 2500-121036) from the PC to the OS update port on the front of the UNO-TS2. The Firmware Update page is reached from the Installers Setup screen.
TECHNICAL SPECIFICATIONS Technical Specifications Power Requirements: CAT-5 Connection: Dimensions: Weight: 26 12VDC @ 350mA 110 punchdown Inside J-Box 3.675"W x 1.150"D x 2.850"H (9.3 x 2.9 x 7.2 cm) Front Panel 5.750”W x 1.0”D x 4.650”H (14.6 x 2.5 x 11.8 cm) Fits UL/CSA Approved Double-gang Junction Box 1 lb 2.5 oz.
WARRANTY Warranty Repair The Russound UNO-TS2 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of purchase. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound.
UNO-TS2 Touchscreen Instruction Manual Russound 5 Forbes Road Newmarket, NH 03857 tel 603.659.5170 fax 603.659.5388 e-mail: tech@russound.com www.russound.com Copyright © 2006 Russound® All rights reserved. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. All trademarks are property of their respective owners. Russound is not responsible for typographical errors or omissions. 28-1163 Rev.
