A / V D I S T R I B U T I O N & C O N T R O L S Y S T E M S Smart Select Volume Control Instruction Manual 1
1. Product Overview The Smart Select™ Volume Control (SSVC) is the next evolution in Volume Control systems. The SSVC integrates Russound’s well-known Ultra-Match™ impedance-matching volume control technology with multi-zone functionality and automation. Smart Select™ offers many outstanding features such as “All On” and “All Off” wholesystem commands, one-button function control interface and an easy to read, three color status indicator light.
SPEAKERS L+ L– R– R+ L+ DATA (YELLOW) SPEAKERS SPEAKERS GND1(BLACK) GND2(BLACK) SPEAKERS 12V+(RED) INPUT To other Smart 3.2 Power and Data Connections (Refer to Figure 2) Select™ Figure 2 Volume EZB-1, 4-Way Smart Select™ IMPORTANT: If you are unsure of any of the installation proceControls Connecting Block dures, the products should be installed by a professional custom installer. 1) Make sure the amplifier or receiver is turned Off, and that the 12 Volt power supply is not plugged in.
pairs you connect. 4) Calculate the system impedance: EXAMPLE: SYSTEM IMPEDANCE = 2Ω SYSTEM IMPEDANCE SPEAKER IMPEDANCE NUMBER OF SPEAKER PAIRS = 8Ω SPEAKERS 4 PAIRS OF SPEAKERS 5) Since you have determined the system impedance you can now calculate the jumper setting needed to protect your amplifier. EXAMPLE: AMPLIFIER’S MIN.
2) Press and hold the function control button until the status indicator blinks amber. 3) All connected SSVCs will now be in Active mode. To turn Off Smart Select™ System and connected source equipment (System Off feature, Smart AC™ Power Controller required) 1) On any SSVC, press the function control button until the status indicator light is red. 2) Press and hold the function control button until the status indicator blinks amber, and then turns red. 3) All connected SSVCs will now be in Mute mode.
