BGK3 iBridge Power Dock Kit Installation Manual
SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TABLE OF CONTENTS Product overview .................................................................................................................... 4 Sample IR system configuration ........................................................................................ 9 Back panel connections ........................................................................................................ 5 Behavior of LEDs .......................................................................................
PRODUCT OVERVIEW Installation and configuration constraints What it does The iBridge Power Dock Kit (BGK3) allows a user to integrate an iPod into a Russound RNET audio system without running new wires. The kit's main components are the iBridge Power Dock (BGD2), the iBridge Dock Adapter (BGDA) and the iBridge Controller Adapter (BGCA). The BGD2 Power Dock is portable because it is powered by and communicates over the home's electrical wiring through its companion piece, the BGDA.
BACK PANEL CONNECTIONS BGDA Dock Adapter (back) BGD2 Power Dock (back) Power Dock Bind Dock Adapter port - RJ45 CAT-5 connector to BGDA Dock Adapter Binding button recessed button initiates binding process with BGCA Power Dock port RJ45 CAT-5 connector to BGD2 Power Dock Power - 2 pronged AC plug, nonpolarized and non-grounding BGCA Controller Adapter (back) IR input - 3.
RNET CONTROL INSTALLATION The following procedure outlines how to set up the BGD2 Power Dock and its adapters for an RNET multiroom audio system. 1. Locate devices Set the iBridge Power Dock in the room where the iPod will be located. Locate a power outlet near the power dock where the BGDA Dock Adapter will be located. Place the BGCA Controller Adapter next to the RNET controller. 2.
SAMPLE RNET SYSTEM CONFIGURATION RJ45 using T568A wiring standard RJ45 RNET Multiroom Controller BGD2 Power Dock CAT-5 cable (RNET link) RCA audio patch cable BGCA Controller Adapter CAT-5 cable BGDA Dock Adapter Power Dock Bind Binding button Binding button Typical installation for RNET multiroom controller system Russound BGK3 iBridge Power Dock Kit Installation Manual 7
IR CONTROL INSTALLATION The following procedure outlines how to set up the BGD2 Power Dock and its adapters for an IR control multiroom audio system. 1. Locate devices Set the iBridge Power Dock in the room where the iPod will be located. Locate a power outlet near the power dock where the BGDA Dock Adapter will be located. Place the BGCA Controller Adapter next to the audio controller. 5.
SAMPLE IR SYSTEM CONFIGURATION RJ45 using T568A wiring standard RJ45 Multiroom controller BGD2 Power Dock RCA audio patch cable IR link cable BGCA Controller Adapter CAT-5 cable BGDA Dock Adapter Power Dock Bind Binding button Binding button Typical installation for IR control multiroom controller system Russound BGK3 iBridge Power Dock Kit Installation Manual 9
BEHAVIOR OF LEDS Activity LED (for BGDA and BGCA) Solid off - no Home Plug network activity detected. Off, periodically blinks on - No home Plug network received. The device is transmitting Home Plug packets. Solid on - Home Plug network traffic was received, but there is currently no Home Plug network traffic. On, periodically blinks off - HomePlug network traffic was received, and there is currently communication (either transmit or receive) on the Home Plug network.
OPERATION USING RNET KEYPADS When the iPod is docked in the Power Dock as part of an RNET audio system, it can be controlled through an RNET keypad or touchscreen. UNO-TS2 Touchscreen Control An UNO-TS2 touchscreen with an RNET system provides the most complete control and feedback option for the iPod. The touchscreen allows navigation through the iPod’s menus to select music by playlist, genre, artist, album, and song. It also displays current selections.
TECHNICAL SPECIFICATIONS BGD2 iBridge Power Dock Dimensions: Weight: iPod connector: Communication port: BGCA Power Dock Controller Adapter 4.72” W x 2.5” D x 1.0” H (12.0 x 6.4 x 2.5 cm) 5.4 oz.
WARRANTY AND REPAIR Warranty The Russound iBridge BGD2, BGDA and BGCA are fully guaranteed against all defects in materials and workmanship for two (2) years from the date of purchase. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound.
NOTES 14 Russound BGK3 iBridge Power Dock Kit Installation Manual
NOTES Russound BGK3 iBridge Power Dock Kit Installation Manual 15
BGK3 iBridge Power Dock Kit Installation Manual ©2008 Russound. All rights reserved. All trademarks are the property of their respective owners. iPod is a trademark of Apple Computer Inc., registered in the US and other countries. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Specifications are subject to change without notice. Russound is not responsible for typographical errors or omissions. Russound, Inc.
