CAS44 Multisource Multiroom Audio Controller/Amplifier
IMPORTANT SAFEGUARDS 10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11.Grounding or Polarization - Precaution should be taken so that the grounding or polarization means of an appliance is not defeated. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
TABLE OF CONTENTS USER SECTION Product Introduction ............................................................................................................5 Component Guide CAS44 Controller ................................................................................................................6 KP4 Keypad........................................................................................................................7 KPL Keypad ...........................................................
TABLE OF CONTENTS INSTALLER SECTION (continued) Source Setup Source Setup Using CAS-RC Remote Control ..................................................................26 CAS-RC Manufacturer’s Device Codes ........................................................................28-34 KPL Setup Flow Chart (Factory Initialization) ................................................................35 KPL Diagnostics Flow Chart........................................................................................
INTRODUCTION Thank you for choosing the Russound® CAS44 controller/amplifier to enhance your home with distributed audio. The CAS44 delivers full-featured multiroom/multisource, high-fidelity audio at an entry-level price. Key features include: • Four sources delivered to any one of four zones for sharing music throughout the home. • Scalable to eight zones by connecting two CAS44s for extended zone coverage (CAA66s and CAS44s do not interoperate).
COMPONENT GUIDE CAS44 FRONT PANEL The CAS44 front panel features a power switch with a push on/push off action and a blue LED “power on” indicator to the left which illuminates 1 6 2 when the unit is on. The four zone LEDs light up amber when the zone is active.
COMPONENT GUIDE KP4 KEYPAD 1 DVD CABLE XM1 AM/FM 8 2 Source 3 7 4 6 5 KP4 Keypad 1 SOURCE NAME - Four clear windows with replaceable source name labels. Current source selected is backlit amber. 2 VOLUME UP - Raises the volume for the room/adjusts User Menu options. 3 VOLUME DOWN - Lowers the volume for the room/adjusts User Menu options. 4 POWER - Turns room ON or OFF when pressed once. When OFF, press and hold will turn OFF all zones.
COMPONENT GUIDE KPL KEYPAD 9 1 8 2 Source 7 3 6 4 5 KPL Keypad 8 1 LCD PANEL - 5-character amber backlit display shows source name, volume and room status. 2 VOLUME UP - Raises the volume for the room/adjust User Menu options. 3 VOLUME DOWN - Lowers the volume for the room/adjust User menu options. 4 POWER (ALL OFF) - Turns room ON or OFF when pressed once. When OFF, press and hold will turn OFF all zones. Power button remains lit when OFF if any other zone in the system is ON.
COMPONENT GUIDE CAS-RC REMOTE CONTROL All source setup and control is contained in the CAS-RC remote control. The CAS44 controller does not require programming for the controller or for source setup. 1 POWER - Turn on or off selected zone. 2 NUMERIC INPUT - Number buttons for direct input of frequency, channel, etc. 3 VOLUME UP/DOWN - Raise or lower the volume in the zone. 4 MUTE - Mutes/unmutes tuner audio output.. 5 INFO - Display current channel and program information.
OPERATION USER OPTIONS SETTINGS KP4 Keypad User Options Mode Operation Source window will blink to indicate the option that is ready for adjustment Bass Balance DVD CABLE XM1 AM/FM Source 4 Press and hold Source button to enter or exit user Options Menu Blue LED will blink to indicate Loudness is ready for adjustment 10 Source 3 Turn On Volume Source KP4 User Options Mode The User Options Mode allows the user to adjust the audio properties of a particular zone.
OPERATION USER OPTIONS SETTINGS KPL Keypad User Options Mode Operation Bass Press Volume Up or Down buttons to adjust setting Source Blue LED will blink to indicate Loudness is ready for adjustment Press and hold Source button to enter or exit user Options Menu Press Source button to select option KPL User Options Mode Options and Settings The User Options Mode allows the user to adjust the audio properties of a particular zone.
INSTALLER GETTING STARTED Unpacking the System Components • Keep the original carton and packing materials for future shipment or storage. System Installation Considerations There are several factors to consider before installing the Russound CAS44 system: • Check for any visible signs of damage. If you encounter any concealed damage, consult your Russound dealer before proceeding to install the unit.
INSTALLER WIRING OVERVIEW RJ-45 Connections The CAT-5 T568A wiring standard shown on the right is used for the RJ-45 terminations. Keypad Wiring For the KP4 or KPL keypad, the following connections are used to terminate the CAT-5 wire to the 110 punchdown on the keypad: CAT-5 WIRE COLOR TYPE Brown. . . . . . . . . . . . . . . . . . . . . +12V • Confirm ahead of time that you can drill an outlet hole easily and in an unobtrusive spot to connect wires with the CAS44.
INSTALLER COMPONENT GUIDE CAS44 Rear Panel 1 2 3 11 14 4 5 6 7 10 8 9 1 RS-232 INTERFACE - The RS-232 Interface allows the zones to be controlled by PC or other devices that have an RS-232 Interface. The RS-232 Interface also allows for firmware updates. 2 CPU UPDATE SWITCH - For firmware updates. 3 KEYPAD PORTS - One KP4/KPL Keypad Port for each of the four CAS44 Zones. 4 COMMON IR OUTPUT - Two Output jacks pass all IR signals from all keypads.
INSTALLER COMPONENT GUIDE Keypad Front Panel The update jumper for the KP4 (and KPL) is located on the right side of the keypad when facing front. This is covered when a trim plate is installed. Note: The update pins on the KP4 are accessed from the side when the keypad is not installed. 2 DVD CABLE XM1 AM/FM 1 OS UPDATE/RUN JUMPER -The pins are jumpered when performing a firmware update on the keypad, and removed during normal operation.
INSTALLER COMPONENT GUIDE Keypad Rear Panel and Installation CAT-5 to KP4/KPL Connection The KP4/KPL keypad uses a 110punchdown terminal on the back panel to provide simple installation and a strong connection for CAT-5 cable’s eight conductors. Punchdown terminals require the use of a punchdown tool. Attach the CAT-5 cable to the 110-punchdown terminal on the KP4 keypad as shown, matching the conductor colors to the connection color guide.
INSTALLER MAKING CONNECTIONS Keypad Port Connection The Keypad Ports are located on the back of the CAS44 in the top left of center. Connections at the Keypad Ports are made with RJ45 connectors using T568A CAT-5 wire configuration. For a clean installation when wiring from a Keypad Port, use an RJ45 CAT-5 patch cable to connect from the keypad port to an RJ45 wall plate (optional). Using the same RJ45 T568A CAT-5 wiring configuration, use CAT-5 from the RJ45 wall plate to the keypad.
INSTALLER MAKING CONNECTIONS Source Audio and IR Connections Source Audio Connections The CAS44 supports up to four audio sources. The Source Inputs are located on the back panel. Connect each source using quality RCA signal cables. Connect the Left and Right Audio outputs from each source to the corresponding inputs on the CAS44 controller. Label each cable with the name of the selected source and the Source Audio input number located on the CAS44.
INSTALLER MAKING CONNECTIONS RNET Source Audio and IR Input Connections RNET Source Audio Connections The CAS44 supports audio connections to Russound RNET components such as the ST2 Tuner and the SMS3 Media Server. the Common IR Out jack is made using an IR link cable with a 1/8’’ plug. An IR Link Cable (Russound P/N 09-0508) is used to connect the IR In of the source to the Common IR Out jack on the CAS44.
INSTALLER MAKING CONNECTIONS Speaker Connections The speakers are connected to the CAS44 using modular snap connectors. Each of these colorcoded connectors is designated for the speaker set of a particular amplified zone. To avoid confusion, connect one zone speaker set at a time starting with Zone 1, taking care to keep zone and speaker wire identities straight. Note: An 8 Ohm minimum speaker is required for each amplified output.
INSTALLER MAKING CONNECTIONS 12VDC Mute Trigger In/Trigger Out 12VDC Mute Trigger In When 12VDC is applied to the Mute In, the system will fully mute all zones in the system. The connections for the trigger are made using a two-conductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is negative (-). This allows for the connection of an external paging or muting device.
INSTALLER MAKING CONNECTIONS Linking Two CAS44 Controllers 22 Linking Two Controllers Two CAS44 controllers can be linked together for a system that supports eight zones and four sources. This setup requires two dual emitters, one IR link cable and eight keypads (KP4 or KPL). Connect one end of the IR link cable to the first controller’s Common IR Out jack and the cable’s other end to the second controller’s Common IR Out jack.
INSTALLER MAKING CONNECTIONS Linking Two CAS44 Controllers L RCA Cables R ST2 Tuner L I O R Tape Player 1584.1 Dual Emitter RCA “Y” Adapters IR Link Cable CAS44 Controller L RCA Cables S M S 3 S M A R T M E D I A S E R V E R R 1584.1 Dual Emitter SMS3 Media Server L I O R DVD Player RCA “Y” Adapters CAS44 Controller RCA “Y” Adapters Pos (+) Neg (–) Russound #09-0508 IR Link Cable Russound #1584.
INSTALLER MAKING CONNECTIONS RS-232 Interface The CAS44 supports RS-232 communication with various third party automation systems or PC for programming and firmware updates of the controller. The RS-232 com port is located on the back of the CAS44 and uses a DB-9 cable connection. For firmware updates, be sure the CPU Update switch next to the the RS232 interface is set in the “Run” position.
INSTALLER INITIAL HARDWARE INSTALL TEST It’s important to conduct an initial test to determine that the hardware components are working properly. 1. Connect the speaker wires from Zone #1 to the CAS44 Zone #1 speaker output connectors. 2. Connect a keypad (KP4, KPL) to Keypad Port #1 on the rear of the CAS44. 3. Connect a source to the Source #1 Input on the CAS44 using RCA Audio patch cables. 4. Plug a 1584.
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL CAS-RC Remote Control The CAS44 controller does not require programming for the controller or for source setup. All source setup and control is contained in the CAS-RC remote control. The CAS-RC Remote Control is designed for use with the Russound CAS44 controller amplifier and system keypads (KP4 and KPL).
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL device should in turn perform the requested function. If it does not, repeat steps 3-5, trying each code for your brand until you find a code that works. If you cannot find a code that works see “Searching for Your Code” in this manual. 6. Repeat steps 1-5 for the other devices you want to control. For future reference, write down each working device code. Searching for your Code Note: S1, S2, S3, S4, Vol +/-, Mute and Power are the same for any source.
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES MANUFACTURER’S CODES Setup Codes for Audio Amplifiers Accuphase Acurus Adcom Aiwa AudioSource Bel Canto Design Bose Carver Classe Curtis Mathes Denon Durabrand GE Harman/Kardon JVC Kenwood Korsun Left Coast Lenoxx Linn Logitech Luxman Magnavox Marantz Mark Levinson Nakamichi NEC Optimus Panasonic Parasound Philips Pioneer Polk Audio PS Audio RCA Realistic Sansui Shure Sony Soundesign Technics Victor Wards Yamaha YBA 30382 30765
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES Antronix 00207, 00022 Archer 00797, 00207, 00153, 00022 Belcor 00056 Bell & Howell 00014 Bell South 00899 Cable Star 00056 Cabletenna 00022 Cableview 00022 Century 00153 Citizen 00315, 00153 Clearmaster 00883 ClearMax 00883 Colour Voice 00025, 00031 Comtronics 00040 Contec 00019 Coolmax 00883 Daeryung 01877, 00877, 00477, 00008 Digi 00637 Director 00476 Dumont 00637 Eastern 00002 Emerson 00797 Everquest 00040, 00015 Focus 00400 F
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES STS Symphonic TAG McLaren Tascam TDK Teac Technics Tivoli Audio Vector Research Victor Wards Yamaha YBA Yorx Zonda 30018 30305 30157 30420 31208 30393, 30180, 30174, 30420 30029, 30207, 30303 31553 30194, 30417 30072 30157, 30053 30888, 30036, 30187, 30170, 31292 30625 30461 30157 Setup Codes for DVD Players Adcom 21094 Advent 21016 Aiwa 20641, 21912 Akai 20899, 20770, 21975, 21089 Allegro 20869 Amphion Media Works 22016, 22001
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES Sony Star Choice Tivo Toshiba UltimateTV Uniden US Digital USDTV Victor Voom Zenith 00639, 01639, 00294, 01640, 00163 00869 01142, 01444, 01443, 01442 00749, 01749, 00790, 00486, 01285 01392, 01640 00724, 00722 01535 01535 00492 00869 00856, 01856 Setup Codes for TVs 888 A-Mark Abex Addison Admiral Advent Adventura Aiko Aiwa Akai Alaron Albatron Ambassador America Action Ampro Anam Anam National Anhua AOC Aolinpike Apex Digital
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES LXI Magnasonic Magnavox Magnin Majestic Marantz Maruman Matsushita Megapower Megatron MEI Meile Memorex Mermaid MGA Midland Minutz Mitsubishi Monivision Motorola MTC Mudan Multitech NAD Nanbao Nansheng National NEC Newave Nikko Nikon Norcent Noshi NTC Onking Onwa Optimus Optoma Optonica Orion Panasonic Panda Penney Philco Philips Pilot Pioneer Portland Prima Princeton 32 10047, 10054, 10154, 10156, 10178 11928, 11913 11454,
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES Zonda 10003 Setup Codes for VCRs ABS Admiral Adventura Aiko Aiwa 21972 20048, 20209 20000 20278 20037, 20000, 20307, 20468, 20124, 20406, 20348, 20479 Akai 20041, 20061, 20175, 20106 Alienware 21972 America Action 20278 American High 20035 Amoisonic 20479 Anam 20162, 20037, 20240, 20278, 20226, 21037 Anam National 20162, 20226 Asha 20240 Audiovox 20037, 20278 Beaumark 20240 Bell & Howell 20104 Blaupunkt 20226 Broksonic 20184,
INSTALLER SOURCE SETUP WITH CAS-RC REMOTE CONTROL MANUFACTURER IR DEVICE CODES 21008, 21972, 20366, 20845, 21503, 20066, 20212, 20828, 21145, 20008 20037, 20240 21972 21989 20240 20045 20038, 20040 20067, 20041, 20008, 20384 20045, 20040, 20061 20037 20240 21972 20000 20060, 20035, 20048, 20047, 20081, 20240, 20000, 20042, 20072, 20062, 20212, 20760 White Westinghouse 20209, 20072, 20637 XR-1000 20035, 20000, 20072 Yamaha 20041, 20038 Zenith 20039, 20033, 20000, 20209, 20034, 20479, 21479, 21139, 20637 ZT G
INSTALLER KPL KEYPAD SETUP AND DIAGNOSTIC MENUS KPL Setup Menu KPL Setup Menu The KPL Setup menu is used to choose source names, check the version number and perform a Factory Initialization of the CAS44 controller. The menu is outlined in the diagram at right. FACT INIT Procedure SOURCE SOURCE To access the Setup Menu, press and release the Setup button on the right side of the keypad until “SrcNm” (source names) appears on the display.
REFERENCE SOURCE NAMES - KPL KEYPAD 36 5-Character Display Description 5-Character Display Description 5-Character Display Description Aux Auxiliary DSS DSS Receiver MSvr1 Media Server 1 Aux 1 AUX 1 DSS 1 DSS 1 MSvr2 Media Server 2 Aux 2 AUX 2 DSS 2 DSS 2 MSvr3 Media Server 3 Blues Blues DSS 3 DSS 3 MiniD Mini Disk Cable Cable DVDCh DVD Changer Mood Mood Music Cbl 1 Cable 1 DVDC1 DVD Changer1 MornM MorningMusic Cbl 2 Cable 2 DVDC2 DVD Changer2 MP3 MP3 Cbl 3
REFERENCE SOURCE NAMES - KPL/KP4 KEYPADS 5-Character Display Description 5-Character Display Description KP4 Labels Src 4 Source 4 XM 3 XM 3 AM/FM Src 5 Source 5 XMRad XM Radio AM/FM 1 Src 6 Source 6 AM/FM 2 Src 7 Source 7 CABLE Src 8 Source 8 CD Specl Special CD 1 Tape Tape CD 2 Tape1 Tape 1 DVD Tape2 Tape 2 DVR TiVo TIVO iPod Tuner Tuner RADIO Tun 1 Tuner 1 SAT Tun 2 Tuner 2 SERVER 1 Tun 3 Tuner 3 SERVER 2 TV TV SERVER 3 VCR VCR SIRIUS VCR 1 VCR 1
TECHNICAL SPECIFICATIONS CAS44 Controller/Amplifier Dimensions: Weight: Power Supply: Fuse Rating: 17"W x 11.5"D x 3.9"H (43 x 29.2 x 10 cm) 17 lbs. 6.5 oz. (7.9 kg) VAC 100-120 @3A or 220-240V @1.25A 50-60Hz 110V input; F3.0A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: Watts per channel: Total Harmonic Distortion: Signal to Noise Ratio: 20W RMS into 8 ohms <0.10% >90.
WARRANTY & REPAIR The Russound CAS44 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of purchase. During this period, Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound.
CAS44 Multisource Multiroom Audio Controller/Amplifier Russound, Inc. 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www.russound.com Copyright © 2005 Russound® All rights reserved. All trademarks are property of their respective owners.
