User Manual
6
USING THE MILLS
• Hold the mill directly over food to be seasoned and press the switch. The motor
will run while the switch is pressed and the light will illuminate.
• Release the switch to stop the motor.
CARE AND MAINTENANCE
• Wipe the outside of the mills with a slightly dampened cloth.
• Wipe any excess seasoning from the underside of the grinders with a dry cloth.
• Check that the light bulb connection points and brass connection pins are clean
and clear of any seasoning. Clean with a coarse brush or steel wool, and dust o
afterwards.
• Do not use the mills over cooking as moisture from the steam can clog the
grinding mechanism.
• If the seasoning becomes damp and/or the mechanism becomes clogged,
completely empty the grinder, rotate the grinder to the plus position and
wash the lower chamber in warm water. A mild dish washing detergent may be
used. Do not wash the motor unit.
• Allow the grinder to dry completely before relling and reassembling.
BATTERIES
• Check that the batteries are tted correctly - there is a guide inside the battery
compartment.
• When you need new batteries, change them all. Do not use new and used
batteries together.
• Ensure that you use the same battery type together i.e. alkaline or heavy duty.
• Do not leave batteries tted in the mills if they are not used regularly. The
batteries may leak and damage the mills.
• Only recharge batteries that are specically designed to be recharged.
• Close the lid.