User manual

9
USING THE MILL
1. Unplug the appliance.
2. Turn the mill upside down.
3. Turn the mill base clockwise, to release it, and lift it out of the
mill.
4. Put the goods to be ground into the bowl – dry goods only. For
best results, don’t fill it more than one third full.
5. Replace the mill base, inside the mill, and turn it anti-clockwise,
to lock it in place.
6. Turn the mill right way up.
7. Lower the mill on to the motor unit, then turn the it clockwise,
to lock it in place.
8. Turn the speed control to Y in short bursts till you achieve the
size of grind you want.
9. Let the speed control return to 0, and wait till the blades stop
moving.
10. Turn the mill anti-clockwise to unlock it, and lift it off the motor
unit.
11. Turn the mill upside down.
12. Tap the mill a couple of times to move all the grounds into the
bowl.
13. Turn the mill base clockwise, to release it, and lift it out of the
mill.
14. Empty the bowl.
CARE AND MAINTENANCE
1. Switch off (0) and unplug before cleaning.
2. Wipe the outside of the motor unit and the mill base with a
damp cloth.
3. Handwash the bowl and seal.
4. If you use a dishwasher, the harsh environment inside the
dishwasher will affect the surface finishes.
5. The damage should be cosmetic only, and should not affect the
operation of the appliance.
` You may wash these parts in a dishwasher.
mill