instructions
Read the instructions and keep them safe. Pass them on if you pass the kettle on. Remove all packaging, but keep it in case you ever need to return the kettle. important safeguards Follow basic safety precautions, including: 1 The kettle must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children. 2 Don’t put the kettle, stand, cable, or plug in liquid. Don’t use the kettle in a bathroom, near water, or outdoors.
switching on 10 Put the kettle on the stand – take care not to spill. 11 Plug the stand into a power socket (switch the socket on, if it’s switchable). 12 Move the switch to 1 – the light will glow, and the kettle will heat up. switching off 13 When the water boils, the kettle will switch itself off, and the light will go out. 14 To switch off manually, move the switch to 0. 15 Lifting the kettle off the stand will also switch it off. general 16 Remove the kettle from the stand before pouring.
water filter 13 Scale particles suspended in the water may give it a cloudy or greasy appearance. The filter will prevent these particles going into your drink. If you see deposits on the filter, clean it, otherwise the performance of your kettle will drop, your drinks may contain scale, and the water inside the kettle may look cloudy. cleaning the filter 14 Check your hands are free from soap, hand cream, or anything which might leave a taint. 15 Switch the kettle off, and let it cool. 16 Open the lid.
connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician. Don’t use a non-rewireable plug unless the fuse cover is in place. If you remove the plug, dispose of it.
