User manual

RUSH PAR 2 RGBW Zoom User Manual 17
3. Press ENTER to confirm your choice (or, to return to the higher level of the
menu structure without making a change press MENU).
Display panel backlight sleep mode
To set the display panel backlight to remain on all the time or to automatically
switch off when the control panel is not in use:
1. Select BACKLIGHT and press ENTER.
2. Use the DOWN and UP buttons to select ON (display backlight constantly
on) or OFF (display backlight turns off when not in use). Press ENTER to
confirm (or, to return to the higher level of the menu structure without
making a change, press MENU).
White balance adjustment
You can adjust the white balance of the fixture (to match other fixtures, for
example) by adjusting the amount of red, green or blue in the white output. To
adjust the white balance mix:
1. Select WHITE BALANCE and press ENTER.
2. Use the DOWN and UP buttons to select RED or GREEN or BLUE.
3. Press ENTER to confirm.
4. Use the DOWN and UP buttons to change the value (125-255).
5. Once the correct value has been selected, press ENTER to confirm (or, to
return to the higher level of the menu structure without making a change,
press MENU).
Fixture test
Automatic tests of all effects or manual test of individual effects can be run
from the control menus.
Automatic effects test
To perform a complete test of all of the fixture’s effects:
1. Select FIXTURE TEST and press ENTER to confirm. The automatic test
will run.
2. To stop the test and return to a higher level of the menu structure, press
MENU.
Manual effects test
The Manual effects test menu can be used to test the fixture’s effects
individually and to set a standalone scene that the fixture will show each time it
is powered on:
1. Select MANUAL TEST and press ENTER.