User Manual

Theright‐handdrop‐downboxletsyouselectthestartingpositionofthemodel–whetheritwillbecominginfrom
the left or right of the central target position. Using this  setting you can also setup the Autorotation Trainer to
practiceinvertedautorotations–adifficultandadvancedmanoeuvre.

Onceyouha vefinishedwiththeAutorotationTrainer,eitherclickthesmallround“X”buttontothetop‐rightofthe
control panel, or select the Training > None menu option to close and return to the main view and standard free
flightmode.

Torque(Prop‐hang)training
TheTorqueTrainerisaspecialsimulationmode whichisdesignedto teachyouthebasicsofprop‐hanging/torque‐
rollingyour3‐dcapableairplanemodelasquicklyaspossible.Inthismode,yourmodelisplacedontheflyingfieldat
anappropriateheight,orientationandposition,andwillnotbreakonimpact.
Youcanthentakecontrolofasmanyorfewcontrolsasyouwish‐withthesimulatorcontrollingtheothers‐until
you are confident at prop‐hanging/torque ‐rolling the model withall controls enabled.You can therefore gradually
buildupfromonesimplecontroltoallcontrolsatyourownpace,decreasingthelearningcurvedramatically.
Ifyoulosecontrolofthemodel,anditmovesacertaindistanceawayfromyourposition,orrotatestoo farover,the
Torque Trainer will automatically restart without you needing to go through the usual take‐off routine – thereby
speedingupthetimetakentomasterthis technique.
Pleasenote thatthe Torque Trainer is only available to fixed‐wing  models. If you attempt to start the trainerwith
anothertypeofmodelselected,orchangetoanothertypeofmodelafterstartingthetrainer,youwillbetakenback
tothemainviewandstandardfreeflightmode.
WhentheTorqueTrainerisactive,theTorqueTrainingToolbarwillappearatthebottomofthescreen.Thiscontains
settingsforconfiguringtheTorqueTrai nertoyourpreferences:
Setup
The left‐hand drop‐down box lets you change the model functions that you have control over. For instance, the
default, easiest setting  is “Throttle only” which only gives you control over the throttle, and only lets the model
moveverticallyupanddown.Asyouprogressdownthislist,youwilltakecontroloftheotherfunctionsuntilyou are
prop‐hanging/torque‐rollingwithallcontrolsactive.
Restart
The next button in the panel is the Restart button. Clicking this will restart the model at the initial position and
orientation.
Auto‐restart
Thisbuttonletsyoutoggletheauto‐restartonoroff.Whenenabled,themodelwillautom aticallyrestartifitmoves
acertaindistanceawayfromyourposition,orrotatestoofaroverfromlevel.
Orientation
The right‐hand drop‐down box lets you change the starting orientation of the model. Using this, you can easily
practiceprop‐hanging/torque‐rollingfr omallsidesofthemodel.
