User Manual

ClickingthisbuttontogglestheplaybackcolourbaratthebottomoftheFlightRecorderdisplay.Oncethisisactive
youcanadjustthecolourtintoftheplaybackmodelusingtheslidersonthebar.Inthisway,youcanadjusthowthe
playbackmodelappearsonscreen–i.e.makeitmoreorlesstransparent.
Mainplaybackbar
ThecentreoftheFlightRecorderistheplaybackbar.Thisshowsthecurrentstatusoftherecordedfile.Whennofile
is playing, this will show “idle”. When you start playi ng a previously recorded file, this will change to “play” along
withthecurrenttimeplayed.Thestatusbarwillalsobegintofill–whenthebarisfullyfilled,theplaybackwillbeat
theendofthetotalplaytime.Whenyouarerecordinganewfile,thestatuswillchangeto“Rec”alongwiththetime
youhavecurrentlyrecorded.
Whenyouareplayingarecordedfile,youcan“scrub”backandforthbyleft‐clickdraggingalongthebarwithyour
mousetoquicklyjumptoapositionintheplayback.
Setin‐point/out‐point
To theright of themain playback bar are thesetin‐point and out‐point buttons. Clickingthesewillsetwhere the
playbackwillstartandstopwhenplaying.