Operation Manual

Page 12 of 16
Then mount the pedal onto the
crank arm.
Adjust the position of the spoke
magnet so the magnet passes
very close to the sensor but does
not touch it. Keep a maximum
distance of 4 – 5 mm between
the magnet and the Runtastic
Speed & Cadence Sensor. Align
the Runtastic Speed & Cadence
Sensor towards the wheel /
spokes as precisely as possible.
Note:
The Speed & Cadence Sensor is
composed of two parts. To en-
sure optimal assembly on your
bicycle slightly loosen the
screws with an Allen key. Now
you can adjust the two parts for