Operation Manual

Page 11 of 16
ward. Close the cable ties,
but do not tighten them
firmly yet.
3. Position the spoke magnet
on one of the spokes so that
the magnet is level with the
Runtastic Speed & Cadence
Sensor. Mount the spoke
magnet on the spoke and
close the cable ties, but do
not tighten them firmly yet.
In order to be able to mount the
pedal magnet in the correct po-
sition, the pedal must first be
disassembled. Then, position the
pedal magnet so that it is level
with the Runtastic Speed & Ca-
dence Sensor.