Operation Manual

Page 10 of 16
smartphone will change from or-
ange to green.
If the activation has not been suc-
cessful, choose “Unpair all sensors”
and repeat the activation process.
In addition, you can deactivate and
then reactivate the Bluetooth signal
in your phone settings.
3. Assembly of the Runtastic Speed
& Cadence Sensor
1. We recommend attaching
the Runtastic Speed & Ca-
dence Sensor to the chain
stay of your bike (see figure
below).
2. Guide the cable ties through
the openings in your
Runtastic Speed & Cadence
Sensor. Mount the sensor to
the chain stay so that the
Runtastic logo faces out-