Operation Manual

Page 8 of 16
3. Connect your Runtastic hardware
Plug the receiver into
the headphone jack
on your smartphone.
Observe the correct
positioning of the
receiver: You can
also connect your smartphone's headphones
to the receiver (the receiver features a
connection socket at the top).
NOTE:
1. Should there be no heart rate reading, it
might be that the contacts for the
receiver in your smartphone are poled
differently. In this case, open the case of
the receiver (as described in point
„Changing the battery for the receiver“)
and change the position of the switch in
the case from A to B. Reattach the cover
of the receiver and repeat the activation
process of the heart rate measurement
as described in point 4. „Activating heart
rate measurement“. If there is unstable
heart rate reading, please contact the
following e-mail address:
[e-mail]
2. The function of the microphone and the
loudspeaker will be disabled when the
receiver is plugged in the phone, it is
however possible to use a headset.
3. The remote control of the iPhone
earphone does not work when the