Operation Manual

Page 10 of 16
BlackBerry:
Go to "Settings" and select "Heart Rate".
Select the option "Heart Rate Monitoring"
and then the setting "enabled", followed by
the option "Heart Rate Sensor" and the
setting "Runtastic". Should there be no heart
rate reading, please refer to the point 1. of
NOTE on page 8.
Windows Phone:
Go to "Settings" and select "Heart Rate
Settings". Set the option "Runtastic Receiver
(5.3 kHz)" to ON. Should there be no heart
rate reading, please refer to the point 1. of
NOTE on page 8.
5. Switching between coded and uncoded
transmission
Sixteen coded and one uncoded channel can
be selected. Pressing the button on the back
of the chest strap
switches between the coded channels. If you
press and hold the button for 5 seconds, it
will automatically switch to the uncoded
channel. Pressing the button again will switch
back to the encoded channels.
iPhone:
Go to "Settings" and select “Heart Rate
Settings”, Select the option “Runtastic
Receiver with Chest Strap”. On the bottom of