SCOPE OF DELIVERY 1 Receiver (Art.no. RUNDC2, Model: TP00270) incl. lithium battery (3V, CR1220) Remove the isolator within the case of the receiver, for this purpose open the case. 1 Chest strap (consisting of a sensor and elastic strap) (Art.no. RUNDC2, model: TD00380) incl. lithium battery (3V, CR2032) The elastic strap can be found in the cardboard insert in which the chest strap sensor is packaged; open the cardboard insert to remove the elastic strap.
RISKS FOR CHILDREN AND INDIVIDUALS REQUIRING ASSISTANCE This device is not intended for use by individuals (including children) with limited physical, sensorial or emotional capacities or limited experience and / or knowledge unless they are supervised by an individual responsible for their safety or receive instructions from the latter as to how the device should be used. SAFETY NOTE Important: Always consult your doctor prior to starting a regular exercise program.
BATTERY OPERATION Your receiver and chest strap are each powered by a lithium battery (receiver: 3V, CR1220; chest strap: 3V, CR2032). The following section provides you with information about using batteries: Always replace a battery with a battery of the same type. Batteries should not be charged or reactivated by any other means and they should not be disassembled, discarded in a fire or short-circuited. Always keep batteries out of the reach of children. Batteries can be fatal if swallowed.
unit. Keep the operating instructions safe so that you can refer to the relevant battery information. Ignoring this information may result in damage and possibly even to the batteries exploding. You can find information on replacing the battery for the receiver and the chest strap under the sections entitled "Changing the battery for the receiver" and "Changing the battery for the chest strap.” DISPOSAL Batteries are hazardous waste.
GETTING STARTED 1. Installation Runtastic app/activation code Insert the below mentioned link in the address bar of your browser to get to Runtastic.com. The descriptions on this site will help you to finish the activation of the code step by step. http://www.runtastic.com/activate Alternatively, you can also scan the QR-code with your smartphone, to get to this site. For using this feature, you have to go to the individual “App Store” of your smartphone to download the free version of the QR-scanner.
2. Attaching the chest strap Front of sensor: Mounting for soft strap Rear of sensor: Sensor contact surfaces Connect the elastic strap to the sensor. Adjust the strap so that the sensor rests firmly against your chest below your pectoral muscles. To ensure good contact with your skin, you will need to moisten the contacts of the sensor or apply an ECG gel (available from health stores).
3. Connect your Runtastic hardware Plug the receiver into the headphone jack on your smartphone. Observe the correct positioning of the receiver: You can also connect your smartphone's headphones to the receiver (the receiver features a connection socket at the top). NOTE: 1. 2. 3. Should there be no heart rate reading, it might be that the contacts for the receiver in your smartphone are poled differently.
4. 5. receiver is plugged in the phone. The receiver will be turned on and consume battery when it is plugged into the phone, even if the Runtastic app is not activated. Please take off the receiver when it is not in use. The battery life of the receiver is around 2.5 years if it is used 1 hour per day. Please change the battery when it is no longer functioning and cannot receive signal from the chest strap. 4.
BlackBerry: Go to "Settings" and select "Heart Rate". Select the option "Heart Rate Monitoring" and then the setting "enabled", followed by the option "Heart Rate Sensor" and the setting "Runtastic". Should there be no heart rate reading, please refer to the point 1. of NOTE on page 8. Windows Phone: Go to "Settings" and select "Heart Rate Settings". Set the option "Runtastic Receiver (5.3 kHz)" to ON. Should there be no heart rate reading, please refer to the point 1. of NOTE on page 8. 5.
the screen you can see on which channel the chest strap is sending. Should you wish to change the channel, press the button on the chest strap as described above to switch to the next coded channel, and then press the button “Re-Pair” and your smartphone will establish a connection to the chest strap again. Android operating systems: Go to "Settings" and select "Heart Rate Settings", under point "Sensor Channel" you can see on which channel the chest strap is sending.
the next encoded channel, select "Connect Sensor" again and your smartphone will establish a connection to the chest strap again. Windows Phone: Go to "Settings" and select "Heart Rate", under point "Sensor Channel" you can see on which channel the chest strap is sending. If it is using a coded channel, it shows a digit. If it uses the uncoded channel, it reads “Uncoded”.
CHANGING RECEIVER THE BATTERY FOR THE Open the housing of the receiver as shown in the illustration. SWITCH B↔A Remove the old battery and insert a new CR1220 3V battery. When doing this please ensure that the positive terminal (+) is facing upwards and that the battery touches the contact in the housing.
CHANGING THE BATTERY FOR THE CHEST STRAP Open the battery compartment cover by inserting a coin and turning it counterclockwise. Remove the old battery and insert a new CR2032 3V battery. When doing this please ensure that the positive terminal (+) is facing upwards. Replace the battery compartment cover and secure it in place by turning it clockwise. When doing this make sure that the cover is firmly closed in order to prevent moisture from entering the chest strap.
DECLARATION OF CONFORMITY EMC Directive 2004/108/EC: Summary of the declaration of conformity: Krippl-Watches hereby declares that the receiver (art. no. RUNDC2, model: TP00270) and chest strap (art. no. RUNDC2, model: TD00380) conform to the basic requirements and other relevant provisions of Directive 2004/108/EC. You can access the declaration of conformity in its entirety by visiting the following website: www.runtastic.com WARRANTY We provide a 24 months warranty for this product.
www.runtastic.
