Operation Manual

45
To start the search for satellites, there are following options:
1) Hold the “MODE”-button to get to the menu, choose GPS “On/Off”, and
activate “on”.
2) Press and hold the “VIEW”-button in the GPS-navigation-mode.
Once you received the GPS-signal, the display shows a directional arrow,
which will show you the way to the next waypoint.
Turn off GPS manually
To turn off the search for satellites, there are following options:
1) Hold the “MODE”-button to get to the menu, choose GPS “On/Off”, and
activate “off”.
2) Press and hold the “VIEW”-button in the GPS-navigation-mode.
GPS Timeout setting up
The “GPS Timeout” defines the time space, how long the watch is looking for
a satellite before it takes the defined timeout. You can set 5 or 30 minutes:
 Hold the “MODE”-button to get to the menu, choose GPS “Timeout”
 Now choose between “5 mins”or “30 mins”.
Basic setting for the GPS Timeout is 5 minutes. When the GPS is on and you
go to an interior room, the watch probably will not have a GPS-reception.
To save the batteries, the GPS-watch will stop searching after 5 minutes and
will turn off the GPS.
Start/Stop Workout
Press the “ST./STP.”-button when you are in the GPS-navigation mode to
start or to stop the workout. Thus the search for the GPS-reception and the