Operation Manual

38
When this symbol appears, enough satellites were found in order for
the GPS watch to determine a 3D position (with altitude).
If the satellites are lost and no position is determined, "GPS Lost" appears on
the screen, until a button is pressed.
GPS manual stop
In order to stop the search for satellites, the following options exist:
1) In the setting mode select „GPS” point from the menu
 „On/Off“, set
„GPS Off!“
2) Press and hold down the "VIEW" from the GPS-Workout-mode.
GPS Timeout setting
The "GPS Timeout" function defines the duration for the satellite search of
the GPS watch, before stopping when being unsuccessful. In the adjustment
mode 5 or 30 minutes can be set for GPS Timeout:
 In the adjustment menu choose „GPS”
 select „Timeout“.
 Then either select "5 mins" or "30 mins".
The basic setting for GPS Timeout is 5 minutes. When the GPS is on and you
enter, for example, into a room, the GPS watch does not usually receive the
GPS signal. In order to protect the accumulators, the GPS watch stops
searching for satellites after 5 minutes and stops the GPS.
Start/stop of training
Press the „ST./STP." button in GPS-Workout-mode in order to start or stop
the training.
This way, the search for GPS signal and cardiac frequency measurement will
be activated automatically (if this has not already been performed manually).