Operation Manual

15
4.2 Charging the accumulator of the GPS watch
The GPS watch has a lithium-polymer accumulator. Charge it for minimum 3
hours before the first use of the GPS watch.
To avoid corrosion, we recommend you to dry the contact points of the GPS
watch well before starting a charging process.
F
ix the clip of the USB cable on the GPS watch according to the following
image and put the USB cable to a USB port of your computer coupled to the
power. The installation of a driver for charging the accumulator is not
necessary.
During the charging process, the following symbol appears on the screen:
i
f the accumulator is fully charged, the display "battery full" appears.