Brochure

Valves and Vent

Combination Union –

Shutoff Valves

These valves are nickel plated combination

shutoff/unions, suitable for exposed installation, or

installation behind pipe trim covers. The valves

are available in either a straight pattern or angle

pattern, in ½” and ¾” sizes (male threaded union

x female threaded connections).

Self-Contained

Thermostatic Control Valves

The nickel plated control valves, combined with

the proper co

ntrol head (as shown below) provide

thermostatic control at the radiator. They are

unavailable in straight, angle, or reverse angle

configurations in both ½” and ¾” sizes (male

threaded union x female threaded connections).

Sensor Control Heads

These control sensors are used in conjunction

with self-contained control valves above. The

CONTROL-SENSOR should be used with the

straight or reverse angle valves, where the control

sensor head is in the open air. The REMOTE-

SEN should be used where the valve and sensor

head are behind a pipe trim. The CONTROL-

SENSOR is available with a white or black finish.

VALVE-PC

Compact Union-Ball Valve

The VALVE-PC is a chrome

plated handleless union-shutoff

valve, suitable for exposed

installation, or installation inside

the PC pipe cover. It is

available in ½” male NPT x ½”

sweat connections only.

Air Vent

The chrome plated NPT-MV is

the standard air vent available

from Runtal.

NPT-MV

PAGE 1
Valves and Vent Combination Union – Shutoff Valves These valves are nickel plated combination shutoff/unions, suitable for exposed installation, or installation behind pipe trim covers. The valves are available in either a straight pattern or angle pattern, in ½” and ¾” sizes (male threaded union x female threaded connections). Self-Contained Thermostatic Control Valves The nickel plated control valves, combined with the proper control head (as shown below) provide thermostatic control at the radiator.