Brochure

Thank you for purchasing the Runtal Electric Baseboard Pedestal Accessory. We are very proud of our
workmanship and quality, and we are certain that you will be thoroughly satisfied with your new Runtal
Electric Baseboard Pedestal. We urge you to contact your local Runtal representative if you have comments
or questions. These instructions are intended to show installation of your Runtal Electric Baseboard Pedestal.
The electrical wiring connections must be made by a qualified professional electrician. Wiring procedures
and connections should be in accordance with the National Electric Code (NEC) and local codes.
The Runtal Electric Baseboard Pedestal must be installed against the floor in a horizontal orientation as
shown below. The electrical wiring can connect at either end.
Runtal North America
187 Neck Road, PO Box 8278, Ward Hill, MA 01835
US Tel: [phone], Canadian Tel: [phone]
www.runtalnorthamerica.com
Contents:
1 Runtal Electric Baseboard Pedestal
1 Mounting Hardware Package
Correct Orientation Incorrect Orientations
Electric Baseboard Pedestal Accessory
Installation Instructions
Proper installation requires Runtal Electric
Baseboard Pedestal to rest on its base.
No other orientations are acceptable
.
Floor
Nested Metal
Mounting Brackets
Engaged
Floor
Nesting Metal
Mounting Brackets
Anchoring
Nut and Bolt
Junction Box
Pedestal
Mounting System
Electric Baseboard
Lag Bolt and
Crown Nut
Electric Baseboard
Attached to
Pedestal Mount
Pedestal Base Plate
Pedestal Base Plate
with Knockout Plug
Anchoring
Nut and Bolt
Engaged
Glass Curtain Wall
Unpack the Electrical Baseboard Pedestal and place in front of
the wall with finished tubes toward the curtain wall and the
brackets toward the room side.
step 5 Securing PedeStal and BaSeBoard
Secure the bottoms of the Pedestal and Electric Baseboard with
bolts provided.
Locate the rough wiring to the left or right side of the
Pedestal (wiring may be done on either side). Once wiring is
available, pull wire up through the Pedestal base plate.
step 2 rough Wiring
step 3 Mounting PedeStal
Bolt the Pedestal firmly to the floor with two lag bolts (by others).
step 1 unPacking
step 4 attaching BaSeBoard to PedeStal BaSe
Hang the Electric Baseboard Radiator from the brackets and
connect the wiring to the Electric Baseboard per the Electric
Baseboard Instructions.
Curtain Wall View Room View Baseboard Not Mounted
Side
View
3”
2
”
c
L
Floor
Available lengths = 36” to 120” in 12” increments
Mounting Brackets
4
1
⁄4” 5
1
⁄2”
10
1
⁄2”
2
1
⁄4”
c
L
10
1
⁄2”
2
3
⁄4”