Quick Start Guide

Add Click for Philips Hue to Hue Bridge
1. Access the Hue App for either Apple
iOS or Android Google Play.
2. Open the ‘Settings’ page.
3. Click on ‘Accessory setup’.
4. Click on ‘Add accessory’.
5. Select ‘Friends of Hue switch’.
6. Follow the on-screen instructions.
7. For advanced configuration options
such as cycling through multiple scenes with
one button, consider downloading third party
app: HueDynamic. http://bit.ly/HueDynamic
Instructions for using Single Rocker:
1. Carefully remove trim piece by
releasing 4 clips on the back of the
Click for Hue switch.
2. Pull off the Dual Rockers.
3. Snap the Single Rocker insert on so
that plungers contact the LEFT side
of the switch.
Requires a Philips Hue Bridge (v2) and Philips Hue app for
Android or iOS for initial setup. Learn more on  meethue.com
Privacy Notice: Please be informed that Philips Lighting will
have access to your personal and usage data via the Hue
bridge. In order to understand how Philips Lighting processes
your personal data and usage data please read respectively
Philips Lighting’s privacy notice and terms of use which can be
found on  meethue.com  .
Contains FCC ID: SVZ-PTM215Z
Contains IC: 5713A-PTM215Z
The enclosed device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (i.) this
device may not cause harmful interference and (ii.) this device
must accept any interference received, including interference
that may cause undesired operation.
Philips is a trademark of Koninklijke Philips N.V.
Hue, Friends of Hue, and all related logos are trademarks of
Signify Holding.
Command Brand is a trademark of 3M.
AHD0643E 2