Use and Care Manual





±¯¯±

±¯¯±«



Problem Possible Cause Solution
Not working
No power supply
Connect to a functioning outlet and
switch on
Water Full Indication Flashes
Drain water tank and reset it, or
re-position the water tank to right
place
Room temperature ˂ 41°F,or
˃95 °F
Self-Protection designed to protect
the unit. Can not work under such
temperature
Bad functioning
Is the air filter clogged? Clean the air filter as instructed
Is the intake duct or discharge
duct obstructed?
Remove the obstruction from the
discharge duct or intake duct.
No air intake Is the filter clogged? Wash the filter
Loud noise
when running
Is the machine put in the plat
place?
Put the machine on the plat ground
Is the filter clogged? Wash the filter
E2 Humidity sensor problem Change a sensor
LO
Environmental humidity is below
20%
The dehumidifier shuts down for self-
protection
HI
Environmental humidity is
above 90%
CL
Low temperature protection, the
environmental temperature
41°F
CH
High temperature protection,
the environmental temperature
95°F