Instructions / Assembly
Page 6 of
13
Checking the gas control
1. Check that the control knob (14) for
the gas supply system is turned to the
"OFF" position before starting any
assembly.
Attaching the legs
2. Attach left leg (9),right back leg (8)
and right front leg (7) to the metal
stand (10) using 4pcs M6 x18 screws
(S013) and 4pcs washers (W002).
3.
Attaching the side and front panels
Attach the side panel (5),back panel
(6) and front panel (4) to the legs using
12pcs M6 x 11 screws (S012) and 12pcs
washers (W002).
Assembly instructions