Instructions / Assembly

Page 7 of 13
Assembly instructions
the tabletop
4. Attach table base to the bottom part
of the table top (2) using 8 pcs M6 x 11
screws (S013) and 8 pcs washers
(W00
2
).
the door
5. Insert the door (3) into the bottom
opening on the left back leg (8) and
secure top connection.
Securing the propane tank
6. Place propane gas tank (not included)
into the metal stand (11). Make sure
the gas tank sits on the metal stand (11)
completely. Turn the preassembled wing
screw on the outer part of metal stand
(11) clockwise to secure the propane gas
tank