User's Manual

WEB GUI description RNU4000BS Base Station User Manual
16 Runcom Technologies Ltd.
Configuration screen The figures below represent the “Configuration” working screens and provides the next
info as described in the table below:
Menu
Section
Description
Configuration
General
General
Provides RF parameters and MCS settings
Provides defined neighbors BS for HO
Double click on one of the defined neighbors BS from
the list in order to obtain the dialog box for define or
update the neighbors BS
IP
Configuration
IP Configuration
Provides BS ETH interface IP addresses settings:
BS ETH interface LAN configuration
IP /subnet/ GW address
ASN GW interface configuration - GW IP
and Authentication address for connection with BS
Note:
- All ASN related IP configuration in BS should
be accordantly to ASN GW configuration
- Recommended default BS ASN GW and
Authentication IP static address is
192.168.0.3
BS DHCP client ENB/DSB(ASN GW is
DHCP server)
Note: Normal configuration /static IP configuration
DHCP is “DSB”
Stand Alone
General
Provide the ability to set the BS network interface
operation mode
Service Flow
Profile
Double click on one of the defined Service Flow profiles
from the list in order to obtain the dialog box for define
or update the Service Flow profiles
CPE Binding
Double click on one of the defined CPE binding list in
order to obtain the dialog box for binding or update the
desirable Service Flow profile with CPE
Multicast Binding
Double click on one of the defined Multicast Binding
CPE list in order to obtain the dialog box for Multicast
binding or update