User's Manual

Installing the RNU4000BS BS RNU4000BS Base Station User Manual
34 Runcom Technologies Ltd.
For poles with a diameter of 1.00-1.75”:
• Mount the BS on the pole using the Clamping Bracket as shown above. Assemble
the bracket CONCAVE as shown.
• Tighten the bracket using the provided screws.
• Use a tightening torque of 14N/m to tighten.
4.1.4 Mounting On a Wall
1. Secure the Bracket Base to the BS underside:
• Secure Bracket Base to the underside of the BS, using the provided screws, as
shown below:
• Verify that the orientation of the hole in the BASE is aligned with the elevation axis.
• Use a tightening torque of 5.7N/m to tighten.
2. Assemble the bracket elements:
• Secure the Bracket Arm to the Bracket Base using the provided screws, as
shown below:
CLAMPING BRACKET
Assembl
ed CONCAVE
on the pole
Secure to BS Underside
BASE