User's Manual

Preface Material RNU4000BS User Manual
II Runcom Technologies Ltd.
About this Guide
This User Manual describes the procedures for commissioning, mounting, installing and managing the
RNU4000BS Base Station.
Notice
This document contains proprietary and confidential material of Runcom Ltd. Any unauthorized
reproduction, use or disclosure of this material, or any part thereof, is strictly prohibited. This document
is solely for the use of Runcom Ltd. employees and authorized Runcom Ltd. customers.
The material furnished in this document is believed to be accurate and reliable. However, no
responsibility is assumed by Runcom Ltd. for the use of this material. Runcom Ltd. reserves the right to
make changes to the material at any time and without notice.
All other trademarks are the property of their respective owners. Other company and brand products and
service names are trademarks or registered trademarks of their respective holders.
Safety Precautions
To avoid injury and to prevent equipment damage, observe the safety precautions below.
• Only qualified personnel should be allowed to install, replace, and service the
equipment. The device cannot be sold retail, to the general public or by mail order. It
must be sold to dealers. Installation must be controlled. Installation must be performed
by licensed professionals. Installation requires special training. The Runcom radios and
antennas should be installed ONLY by experienced installation professionals who are
familiar with local building and safety codes and, wherever applicable, are licensed by
the appropriate government regulatory authorities. Failure to do so may void product
warranty and may expose the end user or the service provider to legal and financial
liabilities.
• Always observe standard safety precautions during installation, operation and
maintenance of this product.
• This equipment must be installed according to country national electrical codes.
• Any changes and modifications to the device and the accessories must be approved by
Runcom.
• All equipment and accessories must be installed in a restricted access area.
• Observe all the labels on the equipment, providing operation details and warnings.
• Read and follow the installation instructions provided in this manual.
• The outdoor base station should be positioned more than 2 meters from humans.
• In case of using cables that are not provided with the equipment package, ensure these
cables comply with the regulatory inspection authorities and are the responsibility of the
customer.
• Do not move or ship equipment unless it is properly packed in its original wrapping and
shipping containers.
Electrical Shock Prevention
• When connecting equipment to the AC and DC voltage supplies, ensure proper polarity.
• Disconnect the power source before installing or maintaining the power wiring.
• Do not operate the equipment if there is any failure or damage to electrical
components.
• Do not touch exposed connections, components or wiring when power is on.