User's Manual

WEB GUI description RNU4000BS Base Station User Manual
10 Runcom Technologies Ltd.
2.1 WEB GUI Menu description
The table below describes the WEB GUI Menu options and their functionalities
Menu Section Description
General Provides BS related HW/SW info General Information
IP Status Provides BS ETH interface IP addresses status
General General Provides RF parameters and MCS settings
Configuration
IP
Configuration
IP Configuration Provides BS related IP addresses settings
Synchronization Provides BS synchronization status Status
BS Status Provides BS sector configuration status
Connection Provides BS RF parameters configuration status Connection
Antenna Status Provides BS antenna configuration status
CPE Info Query Provides ability to obtain fast link status connection
parameters of specific CPE
Monitoring
CPE Info
CPE List Provides list of connected CPE’s and theirs ID and
more detailed connection parameters as link status
parameters and theirs SF connection
Upgrade SW Upgrade Provides BS SW upgrade including all SW components
Recovery Change Version Provides swap between BS SW version (current
running and the previous one)
Reset to Default Provides ability to set the BS to default parameters
related to the SW version
Maintenance
Default
Erase
Configuration File
Provides ability to erase the configuration file in case
if such file was downloaded to BS
2.2 WEB GUI working screens description
General Information Screen – The figure below represent the “General Information” working screen and
provides the next info as described in the table below:
Menu Section Description
General Provides BS ID related info:
• HW – Product Type
• SW – FW /FPAGA version
• BS ID – BS MAC address
General Information
IP Status Provides BS ETH interface IP addresses status:
• BS ETH interface LAN configuration –
IP /subnet/ GW address
• ASN GW interface configuration - GW IP and
Authentication address for connection with BS
• ASN BS DHCP client – ENB/DSB