User's Manual

PicoPlus Base Station User Manual Introducing the PicoPlus BS
Runcom Technologies Ltd. CONFIDENTIAL 3
1.1.2 BS RF Antenna Interfaces
NOTE: Connect the two antenna cables via a splitter.
Connector Description
ANT1
External RF connector for the Main external antenna.
Connector Type: RJ-45 TYCO part no 1546907 1
ANT2
External RF connector for the Diversity external antenna.
Connector Type: RJ-45 TYCO part no 1546907 1
1.2 Supported Antennas
1.2.1 RF Antennas
Two external antennas are supported for diversity.
NOTE 1: Specs for dual-slant antennas described in section 6.2
NOTE 2: Future options will support an integrated antenna array
You may use any other antenna type or model, keeping in mind that the antenna type or
model should be based on the RF planning that was performed in preparation for
deployment at the specific site and is dependent upon the coverage and throughput
requirements of the site.
Antenna port 2
Antenna port 1