User's Manual

RCMS Application PicoPlus Base Station User Manual
32 CONFIDENTIAL Runcom Technologies Ltd.
Parameter Description
GW MAC Address MAC address of the gateway used by the BS.
Sector Features BS Sector Features:
o CS – Convergence Sub Layer
o PHS – Payload Header Separation
o ARQ – Automatically Repeat Requests
o HARQ – Hybrid Automatically Repeat Requests
o MIMO – Multiple Input Multiple Output
o SEC – Security
o R6 – R6 protocol
4.2.2 ARP Table Entries Setup
The ARP Table Entries area is used to view the automatically detected IP address of the
CPE and the MAC addresses of the host beyond the CPE.
NOTE: To sort the ARP table entries in a different order, check mark the Edit field, and re-
organize the entries.
To configure the CPE IP addresses
• Click the IP-Address field of the table entry to be updated.
• Enter the IP address corresponding to the MAC address of every detected CPE.
• Click the (update) ARP Table button to update the ARP table.
MAC Address of
the host beyond
the CPE
Click to sort IP
addresses
Click to update
CPE
IP address
(can be modified)