User's Manual

Installing the PicoPlus BS PicoPlus Base Station User Manual
20 CONFIDENTIAL Runcom Technologies Ltd.
3.1.3 Mounting On a Pole
Note: When installing on a pole, leave at least 40cm space between the BS and the top of
the pole for lightning protection.
To install the BS on a pole
1. Secure the Bracket Base to the BS underside:
• Secure the Bracket Base to the underside of the BS, using the provided screws, as
shown below:
• Verify that the orientation of the hole in the BASE is aligned with the elevation axis.
• Use a tightening torque of 5.7N/m to tighten.
Secure to BS
Underside
BASE