User's Manual

PicoPlus Base Station User Manual Commissioning Procedure
Runcom Technologies Ltd. CONFIDENTIAL 15
2.4 Setting Basic Parameters for Remote Management
and for Traffic Transfer
This section describes how to set the basic parameters required for remote management
and for traffic transfer over the link.
Some of the parameters are set using the RCMS application and others are set using the
MIB Browser (or any other standard MIB Browser applications).
NOTE: Chapter 4 fully describes all the options available on the RCMS.
2.4.1 Setting BS Minimum Parameters
The following minimum BS parameters are defined via the RCMS:
• Base Station IP (if desired)
• Center Frequency
The following parameters are updated via the (RCMS) MIB browser.
• ASN-Gateway IP
• R6_mode
• Null_Authentication or Authentication_EAP_TTLS
2.4.1.1 Setting BS Minimum Parameters via RCMS
To set BS Minimum Parameters
1. It is assumed that a session is already opened to the BS.
2. In the RCMS-BS window, click the Settings tab.
BS basic
parameters
Click to save
changes