User's Manual

Commissioning Procedure PicoPlus Base Station User Manual
14 CONFIDENTIAL Runcom Technologies Ltd.
2.3.3 Enabling the BS to Communicate with the Computer
Configure the RCMS-BS application with the computer's IP, to allow the BS to
recognize it:
• (If not already running) run the RCMS-BS application.
• From the Config menu, select the Board IP option.
• The Board IP window appears.
• Enter the IP Address parameters of the computer connected to the BS
• Click OK.
NOTE: If there is a problem connecting to the base station, the following message appears at the
bottom of the window: No response from Base!
To fix the connection, recheck the cable connection between the PC and the base station and the
connection fields described above.
2.3.4 What Next?
Configure the BS basic parameters according to the following section.
From Config
menu, select
Board IP
Set to the computer's IP
Address