User's Manual

PicoPlus Base Station User Manual RCMS Application
Runcom Technologies Ltd. CONFIDENTIAL 35
4.3.3 UT Info Status
The UT Info area displays a table of the connected CPEs (referred to as User Terminals in
the tab).
Each connected UT is shown in a separate row, showing the Link status and Quality.
Operation buttons are used to control individual (per row) or all CPE operations.
You may also configure the polling intervals (default: 1sec).
The available CPE information and control options are described below.
4.3.3.1 CPE Information Fields
For each listed CPE, the following information is provided:
Parameter Description
MAC Address CPE MAC address (automatically identified).
UL
Number of uplink connections for this CPE (0 indicates no
connection).
DL
Number of downlink connections for this CPE (0 indicates no
connection).
UCinr
Uplink Cinr (Carrier to Interference-plus-Noise Ratio) of this CPE
connection.
DCinr
Downlink Cinr (Carrier to Interference-plus-Noise Ratio) of this
CPE connection.
HRoom Headroom – remaining dynamic range for CPE operation.