Manualshelf

User's Manual

ManualsBrandsRuncom Communications ManualsElectronicsOUTDOOR PICO BASE STATION 2.5 GHz
31323334353637383940
Installing the PicoPlus BS PicoPlus Base Station User Manual
28 CONFIDENTIAL Runcom Technologies Ltd.
3.4.1 Performing a PING Test
To verify connectivity
1. Open a Command Prompt window from the computer connected to the CPE
2. Select Start Run and enter cmd.
3. Enter a Ping command that pings the NOC.
The following shows a Ping command:
4. Verify that the link has been established properly according to the reply received from
the NOC.
5. If no 'ping' reply is received, check connections and required configuration parameters.
3.5 What Next?
Your installation has now been completed. You can now use the RCMS application or any
standard MIB Browser to manage the BS and perform any additional configuration,
monitoring and maintenance operations.