User's Manual

CPE-O-R-WS User Manual
Runcom Technologies Ltd. 19
4.3.2 DHCP
If route mode selected, the CPE can be used as DHCP server by enabling it at “DHCP server configuration”
4.3.3 LAN IP settings
If router mode selected, the LAN IP address should be defined with the subnet mask.
If DHCP enabled, the start IP and end IP address should be defined. The DHCP IPs must be under the subnet range.
Other IPs which are not in the DHCP range, can be used by manually configuration of the devices behind CPE or by
DHCP static lease (configuring static IP for specific device recognized by MAC address).
Lease time define the time which the IP is reserved for a specific MAC identifier after connection loss. In case of CPE
power loss or reboot all reserved IPs are removed from the list.