User's Manual

Preface Material CPE-O-R-WS User and Installation Manual
i Runcom Technologies Ltd.
About this Guide
This User Manual describes the procedures for commissioning, mounting, installing and managing the CPE-O-R-
WS.
Notice
This document contains proprietary and confidential material of Runcom Ltd. Any unauthorized reproduction, use
or disclosure of this material, or any part thereof, is strictly prohibited. This document is solely for the use of
Runcom Ltd. employees and authorized Runcom Ltd. customers.
The material furnished in this document is believed to be accurate and reliable. However, no responsibility is
assumed by Runcom Ltd. for the use of this material. Runcom Ltd. reserves the right to make changes to the
material at any time and without notice.
All other trademarks are the property of their respective owners. Other company and brand products and service
names are trademarks or registered trademarks of their respective holders.
Safety Precautions
To avoid injury and to prevent equipment damage, observe the safety precautions below.
 Only qualified personnel should be allowed to install, replace, and service the equipment. The
device cannot be sold retail, to the general public or by mail order. It must be sold to dealers.
Installation must be controlled. Installation must be performed by licensed professionals.
Installation requires special training. The Runcom radios and antennas should be installed ONLY
by experienced installation professionals who are familiar with local building and safety codes
and, wherever applicable, are licensed by the appropriate government regulatory authorities.
Failure to do so may void product warranty and may expose the end user or the service provider
to legal and financial liabilities.
 Always observe standard safety precautions during installation, operation and maintenance of
this product.
 This equipment must be installed according to country national electrical codes.
 Any changes and modifications to the device and the accessories must be approved by Runcom.
 All equipment and accessories must be installed in a restricted access area.
 Observe all the labels on the equipment, providing operation details and warnings.
 Read and follow the installation instructions provided in this manual.
 The CPE should be positioned more than 2 meters from humans.
 In case of using cables that are not provided with the equipment package, ensure these cables
comply with the regulatory inspection authorities and are the responsibility of the customer.
 Do not move or ship equipment unless it is properly packed in its original wrapping and shipping
containers.
Electrical Shock Prevention
 When connecting equipment to the AC and DC voltage supplies, ensure proper polarity.
 Disconnect the power source before installing or maintaining the power wiring.
 Do not operate the equipment if there is any failure or damage to electrical components.
 Do not touch exposed connections, components or wiring when power is on.
 Install the equipment and the grounded DC supply circuits in adjacent cabinets.
 Protect the DC power source with an adjacent circuit breaker.
 The equipment must be properly grounded before attempting to operate or perform any repairs.