User's Manual

CPE-O-R-WS User Manual
Runcom Technologies Ltd. 11
NOTE: Each CPE MAC ID will have one set of location data (Latitude, Longitude and Antenna Height) associated
to it at the AFAS
Figure 7: AFAS CPE configuration page
After completion of entering the information in the “Add cpe page” click the "Channel request to select Devices"
and press "Go" and the AFAS will ask for channels from the Data Base as shown in Figure 6 below.
Figure 8: AFAS CPE available channels request
After receiving the available channels from the Data Base, AFAS will load the allowed channels to the CPE and the
CPE will establish the link with the Base Station in one of the allowed channels.