User's Manual

RNU4000BS Base Station User Manual
Runcom Technologies Ltd. 49
6 Technical Specifications
The RNU4000BS BS installation procedure involves the following accessories:
• RF Antennas
• GPS Antenna (Optional)
• Mounting kit
This section details the specifications for the RNU4000BS BS and accessories.
6.1 RNU4000BS BS Specifications
Radio
Standard compliance complies with 802.16e according to the WiMAX Forum profiles.
WiMax Fixed and Mobile
Number of sectors 1, 2 or 4 sectors
System Capability LOS, Near LOS, Non LOS
Frequency
470-698MHz (TV white space), 700 – 750MHz, 1.6-1.8GHz, 2.3-
2.7GHz, 3.3-3.8GHz (CBP capability for band 3.675-3.700GHz is
required),4.9-5.0GHz, 5.0-5.15GHz, 5.7-5.8GHz, 5.9-
6.4GHz(Model Dependent) other frequencies are optional
FFT 512, 1024, 2048
FEC Convolution Code and Turbo Code
Channel bandwidth 3.5 MHz, 5 MHz, 7 MHz, 8.75 MHz, 10 MHz, optional 20 MHz
Duplex method TDD, optional FDD/HFDD
Central frequency resolution 125 KHz
Maximum output power (on antenna
connector)
+30dBm
+28 dBm per antenna in 4.9GHz and above
+24dBm per antenna port in TVWS band
Antennas:
Type Integrated Sectored 11dBi (90°) (not for TVWS)
External dual slant
External Single antenna
Number 2 dual-slant; 4 Single
Connectors 4x N-Type, 50 ohm, lightning protected (Optional)
Modulation and coding rates
DL/UL: QPSK (1/2, 3/4) , 16 QAM (1/2, 3/4), 64 QAM (2/3 , 3/4,
5/6 )
(64 QAM is optional for UL)
Diversity Supported MIMO A/B , STC, MRC, SISO,
GPS Integrated
Synchronization Integrated GPS module with on board synchronization unit