User's Manual

RNU4000BS Base Station User Manual
30 Runcom Technologies Ltd.
• Verify that there are no power lines near the pole.
4.1.2 Mounting Bracket Description
The figure below shows the BS mounting bracket.
Note: The same mounting bracket is used for the wall and the pole installation.
The Bracket elements are described in the following table.
Element Description
BRACKET BASE.
This part is connected to the BS.
BRACKET ARM.
This part provides the tilt ability, and connects between the
Bracket BASE and MAIN SUPPORT.
WALL/POLE RACKET
ARM
BASE
CLAMPING BRACKET
Use for securing
bracket to pole