Installation guide

Spreading Images Across the Wall
82 Runco WindowWall Installation Guide
Wall Width and Wall Height
These show the number of displays wide and high for the picture. This may be
different from the physical size of the wall. You could build a 4 x 3 array of displays
and use WALL MODE to put a single picture on the four displays in the upper left
corner, for instance. Using the QUICK CONFIGURE line on the WALL CONFIGURATION
menu will set these automatically.
Unit Column and Unit Row
These represent the position of the display in this “array.” For example, in the 4 x 3
array of displays shown below, Unit numbering starts at the top left corner of the
array. This display would have a Unit Column value of 1 and a Unit Row value of 1.
Using the QUICK CONFIGURE line on the WALL CONFIGURATION menu will set these
automatically.
Wall Mode
When checked, this turns on the Runco’s Big Picture
TM
feature. When not checked,
the display shows the whole picture. Using the QUICK CONFIGURE line on the WALL
CONFIGURATION menu will set these automatically.
Unit Row 1
Unit Column 1
Unit Row 1
Unit Column 2
Unit Row 1
Unit Column 3
Unit Row 1
Unit Column 4
Unit Row 2
Unit Column 1
Unit Row 2
Unit Column 2
Unit Row 2
Unit Column 3
Unit Row 2
Unit Column 4
Unit Row 3
Unit Column 1
Unit Row 3
Unit Column 2
Unit Row 3
Unit Column 3
Unit Row 3
Unit Column 4
Unit Row 4
Unit Column 1
Unit Row 4
Unit Column 2
Unit Row 4
Unit Column 3
Unit Row 4
Unit Column 4