Installation guide

Advanced Options
Runco WindowWall Installation Guide 69
Setting the Clock
Use the following instructions to set the clock.
1 If 0 is not already selected in the Event # line, use the -/+ keys to select it.
2 Depending on the changes you want to make, update any of the following lines:
•Year
•Month
• Date in Month
•Hour
•Minute
Note: Time is calculated using a 24-hour clock. For example, if the current time is 9:30 p.m.,
set the Hour line to 21 and the Minute line to 30.
3
When you are finished making the appropriate changes, press ENTER to see the
new time at the top of the SET CLOCK / SCHEDULE EVENTS menu.
4 Press MENU to close the menu system.
Event # (0= set clock) 0
Frequency Never
Action No Action
Slot to Recall 1
Day of Week Tuesday
Year 2007
Month 03
Date in Month 05
Hour 21
Minute 30