Installation guide

Advanced Options
Runco WindowWall Installation Guide 67
(EDID) Plug and Play
Plug and Play allows the source computer’s video card to query the display and send
the correct resolution. Most video cards work with Runco displays. For the few that
don’t, you may need to turn off Plug and Play and manually specify the video card
settings based on the display’s capabilities.
Allow Frame Lock
Frame lock causes the display to synchronize its vertical refresh timing with that of
the incoming source. This prevents frame tearing or frame dropping. To frame lock,
the incoming signal must be within the refresh parameters of the display itself, which
is from 49 Hz to 62 Hz.
Setting the Clock/Scheduling an Event
The Runco WindowWall can be easily programmed to schedule specific events, such
as turning the unit on or off.
1 To access the SET CLOCK/SCHEDULE EVENTS menu, press MENU on the remote and
from the MAIN MENU, select ADVANCED OPTIONS > SET CLOCK/SCHEDULE EVENTS.
Advanced Options
Color Balance

Size and Position
Miscellaneous Options
Backlight Settings
Serial Port Settings
Set Clock / Schedule Events
Main Menu
Wall Configuration
Picture
Memory
Diagnostics
Advanced Options
Program Information
>