Installation guide

Mounting Brackets to a Wall

28 Runco WindowWall Installation Guide

5 Using a level (a digital one is highly recommended), level the bracket as you keep

in mind the string at the bottom.

6 Align the v-shaped notch on the LCD mount with the desired center of the LCD

(this is done for the first bracket only).

7 Tighten the screws as necessary.

Note: Be sure that as you tighten the screws, the wall is flat. If it is not, use shims near the

mount points as necessary.

Attach horizontal brackets to the LCD mount that will attach to the next LCD

mount you want to install.

9 Repeat steps 4-8 for the first row. Be sure to level all brackets with respect to the

first mounted bracket.

10 Using a digital level, make sure the first row is level. All brackets in a row should

be level with the bracket next to it within ±0.1°.