Installation guide

Configuration Scenarios
Runco WindowWall Installation Guide 113
Source Routing
The QUICK CONFIGURE QUAD setting in the WALL CONFIGURATION menu is used to
configure this scenario. Use Quick Configure Quad 1 & 3.
Wall Settings
By choosing the Quick Configure, the system will configure each LCD automatically.
Because the settings are different for each display, the system must send many
commands to each LCD. Quick Configure Quad takes a bit longer to respond than
other Quick Configure settings.
Scenario 6: Multiple Sub Walls
It is possible to have more than one sub wall at one time on a Runco WindowWall if
certain rules are followed:
One sub wall can be any size and use any input. This sub wall will use the
External Loop.
All the other sub walls must fit within a single Quad Input Manager Module.
This means they will be 2 x 2 or smaller.
Note: 4 x 4 Runco WindowWall with one large and one small sub wall.
A1
A2
A3 A4
B1
B3
C1 C2 D1
B2
B3
D2
C3 C4 D3 D4
A
Loop Out
Dual Link In
Loop Out
Dual Link In
Loop Out
Dual Link In
Digital 1 Digital 2 Digital 3 Digital 4
B
Digital 1 Digital 2 Digital 3 Digital 4
Digital 1 Digital 2 Digital 3 Digital 4
Loop Out
Dual Link In
Digital 1 Digital 2 Digital 3 Digital 4
D
Switch 1 Digital 1
Switch 2 Loop
Switch 3 Loop
Switch 4 Loop
Internal Loop Digital 1
X External Loop Dual Link In
Use Loop External
Switch 1 Loop
Switch 2 Loop
Switch 3 Loop
Switch 4 Digital 4
Internal Loop Digital 1
X External Loop Dual Link In
Use Loop External
Switch 1 Loop
Switch 2 Loop
Switch 3 Loop
Switch 4 Loop
X Internal Loop Digital 3
External Loop Dual Link In
Use Loop Internal
Quad Module Route C
Quad Module Route B
Quad Module Route A
Switch 1 Loop
Switch 2 Loop
Switch 3 Digital 3
Switch 4 Loop
Internal Loop Digital 1
X External Loop Digital 1
Use Loop External
Quad Module Route D
Wall Width 2
Wall Height 2
Unit Row 1
Unit Column 2
X Wall Mode
Wall Width 2
Wall Height 2
Unit Row 2
Unit Column 2
X Wall Mode
Wall Width 2
Wall Height 2
Unit Row 1
Unit Column 1
O Wall Mode
Wall Width 2
Wall Height 2
Unit Row 1
Unit Column 1
O Wall Mode
Wall Width 2
Wall Height 2
Unit Row 1
Unit Column 1
O Wall Mode
Wall Width 4
Wall Height 4
Unit Row 1
Unit Column 2
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 2
Unit Column 2
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 3
Unit Column 1
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 4
Unit Column 1
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 3
Unit Column 2
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 3
Unit Column 3
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 4
Unit Column 4
X Wall Mode
Wall Width 2
Wall Height 2
Unit Row 1
Unit Column 2
X Wall Mode
Wall Width 2
Wall Height 2
Unit Row 1
Unit Column 2
X Wall Mode
C
Source 1 Source 2 Source 3
Source 9
Source 4 Source 5 Source 6
Source 7 Source 8
Source 7 Source 8
Source 4
Source 6
Source 9
Source 8 Source 8
Wall Width 4
Wall Height 4
Unit Row 3
Unit Column 4
X Wall Mode
Wall Width 4
Wall Height 4
Unit Row 2
Unit Column 1
X Wall Mode